Calla® 301-A Lemon is a uniquely formulated all-purpose and heavy duty cleaning and degreasing compound that efficiently removes grease, oils, carbon, hydraulic fluid, dirt, and many soils that resist other cleaners. It is nonflammable, biodegradable, and contains no irritating vapors or harmful concentrations of phenols, chromates, or chlorinated solvents. Calla® 301-A Lemon is noncorrosive and will not pit, stain, or attack aluminum alloys, magnesium, copper, steel, or other metals. It will not injure acrylic paint or other paints used on equipment, machines, or automobiles when used as directed. It will not damage the wiring on motors or acrylic based plastics. Calla® 301-A Lemon rinses easily and leaves no residue or stain even if it is allowed to completely dry on the surface. Calla® 301-A Lemon is a recommended product for cleaning aircraft, aircraft components, and facilities because it has been used to clean many types of aircraft under variable conditions for several years.
Fuselage Tail Sections, Wing Tips, etc: Mix 1 part of Calla® 301-A Lemon with 3 to 20 parts water, depending on the amount of soil that exists. Next, apply the mixture by spray or mop and allow it to penetrate for a few minutes before mopping or brushing. Thoroughly rinse the mixture with water after these steps are complete. To recover badly oxidized surfaces, use the 1:3 mixture because it provides high quality results under most conditions. Future washings with highly diluted mixtures will maintain oxide free and shiny surfaces. Blast Areas, Landing Gear: Mix 1 part of Calla® 301-A Lemon with 3 parts of water. Next, apply the mixture by spray or mop and allow it to penetrate for a few minutes before scrubbing the heavy deposits. If that task is complete, then the mixture can be flood rinsed with water. If a solvent can be used, mix 1 part of Calla® 301-A Lemon with 5 parts of solvent and briefly agitate the mixture with air to form the emulsion. Spray or mop the mixture over the entire area and allow it to penetrate for a few minutes. Finally, scrub the surfaces well and rinse them with water. Dilute Calla® 301-A Lemon, based on the amount of soil, in an open bucket or barrel, saturate a mop in the Calla® 301-A Lemon solution, and wring out the excess water. Moreover, the surface must be mopped thoroughly where only small areas of surface can be covered at a time. Lastly, rinse the surface with a clean and damp mop. Vinyl Plastics Or Fabrics, Rugs, Toilets: Mix 1 part of Calla® 301-A Lemon with 4 to 8 parts of water for general use. Apply the mixture via spray, brush, or cloth and allow time for it to penetrate. Next, agitate the mixture with a brush or a cloth. Furthermore, the mixture should be wiped off with a clean and damp cloth. If the mixture has been appplied to rugs or carpeting, then the residue must be removed with a vacuum unit. On ovens, apply Calla® 301-A Lemon undiluted, or diluted 1:1 with water. Next, spray or sponge the area that needs to be cleaned and allow it to penetrate for 10 minutes. Remove the baked-on grease with a scouring pad, rinse with warm water, and wipe thoroughly. Use Calla® 301-A Lemon in 1 to 5 parts of water in scrubbers. Mix 1 part of Calla® 301-A Lemon with 3 to 5 parts of water. After that step is complete, apply the mixture by spray or brush and allow it to penetrate for 3 to 5 minutes. If necessary, agitate the mixture and rinse it off with water. Heated Dip Tank: Dilute the Calla®? 301-A Lemon with 1 to 4 parts of water, depending on the operating temperature of the tank. For wheels, soak the mixture for 30+ minutes, scrub heavy deposits with wheel brush, and rinse with hot water. Dilute Calla® 301-A Lemon 1:1 with water or 1:4 with solvent, agitate the solution, and proceed to the next steps as indicated in the heated dip tank method. Use Calla® 301-A Lemon undilluted and allow 30 minutes for it to penetrate. Agitate with air if possible and rinse with water. In an ultrasonic tank, use 1 part of Calla® 301-A Lemon with 3 parts of water for best results. Dilute 1 part Calla® 301-A Lemon with 20 parts of water in solution tank. Increase concentration if required by extreme soil condition. Calla® 301-A Lemon will reduce scale on machine coils. Provide spray wetting and penetrating action so the mixture can rinse freely.