Skygeek View Cart SkyGeek Facebook SkyGeek Twitter SkyGeek YouTube View All Brands Best Sellers New Arrivals Skygeek View Cart
HomeShop SuppliesAdhesivesGeneral Purpose AdhesivesJ-B Weld™ 8265-S Original Cold-Weld™ Formula Steel Reinforced Epoxy - 2- 1 oz Tube Kit
Images
J-B Weld™ 8265-S Original Cold-Weld™ Formula Steel Reinforced Epoxy - 2- 1 oz Tube Kit
Click To Enlarge
Customer Reviews

J-B Weld™ 8265-S Original Cold-Weld™ Formula Steel Reinforced Epoxy - 2- 1 oz Tube Kit

Part#: 8265-S
Our Price (Tube): $4.39
   (Sold in increments of 1)
Bulk Shop & Save
1 - 5$4.39 ea.
6 - 11$4.26 ea.
12 - 23$4.14 ea.
24 - 35$4.03 ea.
36+$3.93 ea.

Loading Item Availability: If this message doesn't go away please enable Javascript to see product Availability!
Quantity:
SKYGEEK WELCOMES INTERNATIONAL ORDERS
  • Please allow for an extra 7-10 days for International orders to process, especially orders including HazMat items, or items that are not in stock in our NY Warehouse.
  • International Orders Ship Complete: You get one package shipped which reduces added taxes and duties that may be incurred from multiple shipments.
  • (SDS) Safety Data Sheet Information
    (SDS) Safety Data Sheet: MSDS1
    CA Prop 65 WarningWarning: This product may contain a chemical known by the State of California to cause health issues. Details found here www.P65Warnings.ca.gov
     
     
    J-B Weld's flagship product. J-B WELD is the world's finest cold-weld compound. It's a remarkably easy, convenient, and inexpensive alternative to welding, soldering, and brazing. J-B WELD is the smart way to repair something…and for literally pennies per use. When welding or soldering is out of the question due to cost, down time for repairs, or technical/environmental considerations, J-B WELD is the answer.

    ow does it work?

    J-B WELD is packaged in two tubes. One contains liquid steel/epoxy resin, and the other contains hardener. When mixed together in equal portions, a chemical reaction occurs that turns the mixture into a compound as hard and tough as steel -- and with similar properties.

    ow to use it: Use J-B WELD as an adhesive, laminate, plug, filler, sealant, and electrical insulator. Squeeze out equal portions from the black and red tubes. Mix thoroughly. Clean surface to be bonded. Apply J-B WELD, and let it cure. that's all there is to it!

    Like metal, J-B WELD can be formed, drilled, ground, tapped, machined, filled, sanded, and painted. It stays pliable for about 30 minutes after mixing, sets in 4-6 hours, and cures fully in 15-24 hours. It's water-proof; petroleum-, chemical-, and acid-resistent; resists shock, vibration, and extreme temperature fluctuations, and withstands temperatures up to 500° F. J-B WELD is super strong, non-toxic, and safe to use. Before it sets, you can clean up with soap and water.

    Mechanics -- you can use J-B WELD with confidence. It is designed for safe, reliable, permanent repairs in engine compartments and heated environments up to 500° F. It's strong as steel and impervious to water, gasoline, chemicals, and acids. Working with J-B WELD is quick, easy, and convenient -- and saves you time, work, and money!

    Not recommended for use on manifolds, exhaust systems, and other engine components which normally operate at temperatures above 500° F.

  • MIXING: J-B WELD consists of two parts. Squeeze equal parts from each tube onto any clean disposable surface. Mix together thoroughly. A wooden dowel or paddle is a good mixing tool.
  • PREPARING SURFACE: Surface for application must be clean, dry, and free of dirt, grease, oil, etc. Remove any paint, primer, rust, etc. before applying J-B WELD. For the best weld, roughen surfaces to be welded with fine or course sandpaper.
  • APPLICATION: Apply with putty knife, spoon, wooden paddle, or other suitable tool. Avoid contact with skin and eyes. May be applied in an even coat, weld bead, or extruded shape as needed.
  • DRYING: Allow 4-6 hours for drying before handling. Allow to dry overnight (approximately 15 hours) before putting object to use. J-B WELD works faster if used in a room with a temperature above 50? F. After J-B WELD has cured for six hours, a heat lamp or light bulb placed near the weld will speed drying time.
  • IMPORTANT: In hot weather or in a very warm room, let J-B WELD set up or dry for about 15 to 20 minutes after mixing. This lets it thicken and prevents running or sagging. In cold weather, a heat lamp or light bulb placed close by will hasten drying time.
  •  
    Product Details
    UOM : Tube
    Pack Quantity : 1
    Ship Dimensions : 9 x 5 x 2 inches
    Shipping Weight : 0.6 pounds
    Manufacturer P/N : 8265-S
    UPC : 043425826558
    EAN : 0043425826558
    ECCN : EAR99
    Schedule B Code : 3214.10.0010
    Disclaimer: While reasonable efforts have been made to ensure all information on this website is accurate, SkyGeek.com and Styles Logistics, Inc. do not assume responsibility for any errors or omissions. All specifications, illustrations, data and prices are subject to change without notice.
    Specifications
  • Tensile Strength: 3960
  • Adhesion: 1800
  • Flex Strength: 7320
  • Tensile Lap Shear: 1040
  • Shrinkage: 0.0%
  • Resistant to: 500° F
  • NewsletterKeep Up-to-Date with SkyGeekStore InfoCustomer Care
    Sign Up For Our Newsletter

    © 2019. SkyGeek.com has Aircraft Oil, Aircraft Tools, and more for all your aviation supply needs.
    Secure Shopping
    Customer Reviews