Hysol EA 9396/C-2 is an elevated curing, low viscosity structural adhesive. Hysol EA 9396/C-2 uses a nonaromatic amine curing agent that retains many of the excellent properties offered by aromatic amine curing systems.
Mixing - This product requires mixing two components together just prior to application to the parts to be bonded. Complete mixing is necessary. The temperature of the separate components prior to mixing is not critical, but should be close to room temperature (77°F/25°C).
Note: Volume measurement is not recommended for structural applications unless special precautions are taken to assure proper ratios.
Part A- 100 by Weight
Part B- 36 by Weight
Pot Life -(100 g mass) 480 minutes @ 77°F/25°C
Method - ASTM D2471 in water bath.
Mixing - Combine Part A and Part B in the correct ratio and mix thoroughly. THIS IS IMPORTANT! Heat buildup during or after mixing is normal. Do not mix quantities greater than 450 grams as dangerous heat buildup can occur causing uncontrolled decomposition of the mixed adhesive. TOXIC FUMES CAN OCCUR, RESULTING IN PERSONAL INJURY. Mixing smaller quantities will minimize the heat buildup.
Applying - Bonding surfaces should be clean, dry and properly prepared. For optimum surface preparation consult the Hysol Surface Preparation Guide. The bonded parts should be held in contact until the adhesive is set.
Curing -This adhesive should be cured for a minimum of 1 hour @ 200°F/93°C to achieve normal performance.
Cleanup - It is important to remove excess adhesive from the work area and application equipment before it hardens. Denatured alcohol and many common industrial solvents are suitable for removing uncured adhesive. Consult your supplier's information pertaining to the safe and proper use of solvents.
UOM : Each
Pack Quantity : 1
Size : Quart
Color Family : Purple
Ship Dimensions : 8 x 8 x 5 inches
Shipping Weight : 4 pounds
Manufacturer P/N :EA 9396/C2
NSN : 8040-01-649-5905
ECCN : EAR99
Schedule B Code : 3214.10.0010
Alt. P/Ns : EA9396/C-2,AS9323016
Disclaimer: While reasonable efforts have been made to ensure all information on this website is accurate, SkyGeek.com and Styles Logistics, Inc. do not assume responsibility for any errors or omissions. All specifications, illustrations, data and prices are subject to change without notice.
If the item that you are trying to ship is deemed Hazmat you may have an additional fee added to your order when you check out. Items are deemed Hazmat as per the Section 14 Transport Information located in the item's Material Safety Data Sheet (MSDS). Sorry, but things that can go "boom" are hard to ship and we have to pass on our fees.
Flammable or explosive items such as Fire Extinguishers, MEK, Toluene, Paint Thinner, etc. are subject to a $40.00 Hazmat fee via ground shipping methods. However, the majority of Hazmat items have no fee when shipping with a ground method.
Most Hazardous Goods are subject to air and international transport fees. This fee is $105 for domestic air shipping methods and $162.50 for international shipping methods.
Mail the completed form with the original UPC code from the product package and a copy of your sales receipt with the eligible product circled postmarked no later than 1/1/2012. Service activation is required; mail in one of the following options as proof of service activation:
Copy of your activation confirmation email (provided after you activate service).
Copy of the sale receipt for a SPOT service certificate (available at www.findmeSPOT.com).
Promotion #37761, SPOT 2 NATIONAL REBATE PO Box 22092, Tempe, AZ 85285-2092.