Flamemaster CS 2415 B-1/2 Gray MIL-S-38228 Ty 1-1/2 Amd. 2 Spec Aluminum Exterior Sealant - 6 oz (3.5 fl oz) Cartridge Kit

Features

• Color:
  • Base Compound - Aluminum
  • Curing Agent - Black
• Viscosity:
  • Base Compound (Brookfield RVF Spindle #7, 2 RPM) - 12,000 Poises
  • Curing Agent - Heavy Paste
• Mixing Ratio: 100:10 by weight
• Application Life: 2 hours minimum
• Tack Free Time: < than 24 hours
• Cure Rate: 72 hours

A two component, polysulfide based, aluminum filled, non-flow, filleting material designed for Aircraft sealing. CS 2415 is based on Flamemaster technology, utilizing Permapol P-5 Polymers, an improved chemical modification Of Thiokol LP* polymers.Permapol P-5 polymers are covered under U.S. Patent 4,623,711.

CURE

The rate of cure is affected by temperature and humidity. High temperature and high humidity accelerate the cure and low temperature and low humidity retard it. To hasten curing under adverse conditions, it is permissible to heat the applied compound with infrared lamps or by other convenient means. However, temperatures higher than 120 deg. F may cause sponging or bubbling of the uncured compound and should be avoided. Full cure is obtained in seven days at 77 deg. F and 50% R.H.

MIXING INSTRUCTIONS

CAUTION: This product has a limited application life. Do not mix accelerator and base compound together until ready to use. The accelerator and base compound are carefully matched in production for optimum performance characteristics. The accelerator is packaged in a separate container, but the label designates by batch number which lot of accelerator is matched to which lot of base compound. Care should be taken to assure that the accelerator and the base compound are a designated "match" before the two are mixed. Proper mixing of all two-component synthetic rubber compounds requires care to obtain a uniform, air free mix. Mechanical mixing is recommended for best results. However, mixing by hand is entirely satisfactory for small quantities. When material is to be mixed in the gallon or smaller sized unit, it is advisable to remove the rim of the container with a can opener to make the mixing and pouring operations easier.

Downloads

 Safety Data Sheet