When it comes to adhesives, you need a hold that you can count on. 3M™ Scotch-Weld DP490 Epoxy Adhesive from SkyGeek offers the strength you need to tackle virtually any repair or installation. The heat-resistant epoxy adhesive is super thick and goes on smoothly, filling gaps and grabbing onto surfaces for a stronger, longer lasting hold. The secret behind the strength is the epoxy's unique two-component formula, which is only activated once mixed. As soon as the two components come together, the adhesive's unique properties are unlocked, allowing it to grab on to the surface tightly and to hold on through even the most demanding of situations. It is specially designed for uses where toughness and high strength is required. It shows special benefits in the construction of composite assemblies and has excellent heat and environmental resistance for a stronger, more reliable hold.
3M™ Scotch-Weld Epoxy Adhesive from SkyGeek is sold in a 50 mL Duo-Pak cartridge, where the two components that make up the adhesive are kept separate until needed. The special cartridge design allows for both components to be dispensed evenly with very little effort to ensure the perfect blend. Applicators and mixing nozzles that attach directly to the cartridge may be purchased separately to suit your particular needs and project. Scotch-Weld Epoxy Adhesive is available at SkyGeek’s everyday low prices and is well-suited for a variety of aerospace applications. Quantity discounts are available on qualifying orders and a manufacturer’s certification may be added to any purchase of 3M™ DP490 Scotch-Weld Epoxy Adhesive for a small additional charge.
Store product at 15°C to 25°C for maximum storage life.
Packaged in convenient Duo-Pak cartridges designed for use with 3M EPX Applicators.
Applicator and mixing nozzles sold separately. See Here.
Place the cartridge into the 3M EPX Applicator and clip into position.
Remove the resealable cap.
Expel a small quantity of adhesive and ensure both components flow freely.
Attach correct mixer nozzle (this should have 20 or more elements).
Dispense the adhesive as required.
When finished either leave the nozzle in place and store, or remove the nozzle, wipe clean the tip, and replace cap.
To re-start after storage remove the old nozzle with cured adhesive and re-fit a new nozzle, or remove the cap and fit a new nozzle.
Disclaimer: While reasonable efforts have been made to ensure all information on this website is accurate, SkyGeek.com and Styles Logistics, Inc. do not assume responsibility for any errors or omissions. All specifications, illustrations, data and prices are subject to change without notice.
Specific Gravity Base Accelerator
Consistency Base Accelerator
Non-sag paste Non-sag paste
Mix Ratio (By Weight & Volume) Base Accelerator
Color Base Accelerator
1.5 hours minimum at 23?C
Time to Handling Strength
4 to 6 hours at 23?C
Time to Full Strength
7 days (test to full performance at one week)
15 months from date of despatch by 3M when stored in the original carton at 21?C (70?F) & 50 % Relative Humidity
If the item that you are trying to ship is deemed Hazmat you may have an additional fee added to your order when you check out. Items are deemed Hazmat as per the Section 14 Transport Information located in the item's Material Safety Data Sheet (MSDS). Sorry, but things that can go "boom" are hard to ship and we have to pass on our fees.
Flammable or explosive items such as Fire Extinguishers, MEK, Toluene, Paint Thinner, etc. are subject to a $40.00 Hazmat fee via ground shipping methods. However, the majority of Hazmat items have no fee when shipping with a ground method.
Most Hazardous Goods are subject to air and international transport fees. This fee is $105 for domestic air shipping methods and $162.50 for international shipping methods.
Mail the completed form with the original UPC code from the product package and a copy of your sales receipt with the eligible product circled postmarked no later than 1/1/2012. Service activation is required; mail in one of the following options as proof of service activation:
Copy of your activation confirmation email (provided after you activate service).
Copy of the sale receipt for a SPOT service certificate (available at www.findmeSPOT.com).
Promotion #37761, SPOT 2 NATIONAL REBATE PO Box 22092, Tempe, AZ 85285-2092.