R-MC 4070-5 Compressor Wash - 5 Gallon - Pre-mixed - MIL-C-85704 Type 2A

R-MC is the best turbine engine cleaning product, whether you are operating smaller turbines (such as Rolls-Royce 250, Pratt & Whitney PT6-A and JT-15D, etc.) or multi-million dollar airline engines. Real time operating experiences show that engine performance and component life benefit significantly from the use of R-MC. With R-MC, the cleaning procedure is easy, fast, and safe, it requires no mixing prior to use and no rinsing after use, in most applications. The average cleaning time is less than 30 minutes, and R-MC is non-flammable, non-toxic and biodegradable. ECT provides application tooling built to exacting standards for all makes of gas turbines. Our technical support personnel are available to ensure that the full benefits of R-MC are achieved. When contaminants accumulate in the compressors of gas turbine engines, the outcome is predictable: sharply reduced power, increased running temperatures, greater fuel consumption, and possible compressor vibration and stall during acceleration. In short, unnecessary and costly unit downtime. Small aircraft operators have found that cleaning with R-MC leads up to 50% greater time between overhauls.

Aircraft operators have found that cleaning with R-MC leads up to 50% greater time between overhauls.

Rolls-Royce flight turbine operators have reported:

3 percent performance improvement over deteriorated engine condition.

Average ITT drop of 18° after one wash.

No engine deterioration due to deposits at 600 hour inspection.

PT6 operators have reported:

Increase in TBO from 5000 to 7500 hours.

Absence of corrosion and salt deposits in severe environments.

JT-8, CFM56 and CF-6 operators have reported:

Decreased fuel consumption of 1-3%.

Lowered EGT of up to 10°C.

ECT's patented and widely used R-MC engine cleaner effectively inhibits and reverses contaminant build-up. In most cases, it achieves efficient in-service engine cleaning without engine shutdown.

(Consult your engine manual and use in accordance with engine manufacturer's recommendations).

With R-MC, the cleaning procedure is easy, fast, and safe:

Requires no mixing prior to use and no rinsing after use, in most applications.

Average cleaning time is less than 30 minutes.

R-MC is non-flammable, non-toxic and biodegradable.