PM Research PM-121 Gulfstream G-300, G-400, G-450, G-500 & G-550 Radome Erosion Boot
Country of Origin: United States
|Not Applicable for this Product|
|1 - 11||$177.36 ea.|
This M Research PM-121 Radome Boot
ill fit the following aircraft: ulfstream G3, or G2 with G3 nose, C-20A, B, D, and E, Gulfstream G4, C20F, G, H, Gulfstream G5 and C37, Gulfstream G300, Gulfstream G400, Gulfstream G450, Gulfstream G500, Gulfstream G550
. PM Research masks are made from a clear, self-adhesive Polyurethane that is .012 of an inch thick. The Polyurethane is not affected by UV light, meaning it will never yellow and it will not change the cosmetic appearance of your aircraft. The mask is easy to install by peeling off the backing and wetting the material with a solution of distilled water, alcohol and dish washing liquid, and you can fly within an hour of installation. An 11 page instruction booklet comes with each mask giving detailed installation instructions. Shelf life is 5+ years.
Because installing a PM Research mask is like applying a thick coat of paint, FAA or PMA approval is not required, nor is an STC or Form 8130 required. This is confirmed in a letter from the FAA.
ot what you were looking for? heck out our span style="color:#F75600;">Aircraft Erosion Protection Buyer's Guide to get the exact mask you need for your aircraft!
Alternate PN#s: SJ8665 FP-197 SJ8665FP197
Gulfstream G3, or G2 with G3 nose, C-20A, B, D, and EGulfstream G4, C20F, G, HGulfstream G5 and C37Gulfstream G300Gulfstream G400Gulfstream G450Gulfstream G500Gulfstream G550 | |
Disclaimer: While reasonable efforts have been made to ensure all information on this website is accurate, SkyGeek.com and Styles Logistics, Inc. do not assume responsibility for any errors or omissions. All specifications, illustrations, data and prices are subject to change without notice.
FeaturesMask material is engineered to an optimal thickness of .012 of an inchThe material is nearly invisibleThe only mask material on the market that has never yellowed and will never yellowEasy to installThe best erosion protection available
In The Box
Included with the mask:11 page Shop Manual of instructions (includes photographs)Plastic squeegeeClean squirt bottleWater soluble marking penSpout cap (for measuring dish washing liquid)
Additional materials needed for installation that ARE NOT INCLUDED WITH KIT:
1. 1/4" masking tape4 oz. Isopropyl alcohol, 70% by volume (common rubbing alcohol)12 oz. Distilled water21 drops of clear or white dish washing liquid, regular strength, or 14 drops of concentrated
2. Wetting solution consisting of:
3. Razor blade knife (new blade only)
4. Paper towels (high quality, oil free, single ply only)
5. Rubber hospital type gloves
6. Non-silicon based automotive paste wax
7. For installation over stripes or on a new or freshly polished lens:
600-1500 grit sandpaperSanding blockRubbing compound
8. Scissors or tin snips