Permatex® Plastic Cleaner is a white, creamy liquid with a mild, pleasant odor. The principal use for Permatex® Plastic Cleaner was in the aviation field for cleaning plastic windows and canopies. However, because of its excellent properties, has many applications in automotive, marine, motorcycle and industrial areas as well as numerous household uses. It is specifically developed for use as a polish and cleaner capable of removing accumulated service soils and producing a smooth, lustrous finish on clear and pigmented plastic surfaces. Although Permatex® Plastic Cleaner was developed for use on clear surfaces made of acrylic polymer (Lucite, Plexiglass, etc.), it is also effective on other plastic surfaces, clear or opaque, including polycarbonates (Lexan), acetates, rigid vinyls, polystyrene (Polysar, Styron) and high pressure laminates (Formica, Nevamar, Lamin-art, Textolite). It may also be used as a cleaner and polish for hard enameled surfaces, glass, ceramics and stainless steel. Conforms to Federal Specification P-P 560, Type I.
Gives a clean, smooth, lustrous finish on plastics
Forms a water-repellent, anti static shield
Extends the life of plastics
Reduces replacement costs
Improves visibility
Contains no ozone depleting compounds
Easy application
Removes grease, lubricants, stains and dirt Chemical Type: Naphtha, Emulsifiers
Appearance: White, creamy liquid
Odor: Mild petroleum
Specific Gravity: 0.99
Viscosity: Flow is similar to SAE 10
Motor Oil
Flash Point, Setaflash Closed Cup, °F: 112
Storage
Products shall be ideally stored in a cool, dry location in
unopened containers at a temperature between 8° to 28°C (46° to 82°F) unless otherwise labeled. Optimal storage is at the lower half of this temperature range. To prevent contamination of unused product, do not return any material to its original container. Plastic windows
Canopies
Instrument covers
Goggles
Lenses
Motorcycle helmets
Motorcycle windshields
Boat and aircraft windshields
Excellent on acrylic, polycarbonate, acetates, rigid vinyl, polystyrene and decorative laminates.
- Flush extremely dirty surfaces with water.
- Shake well before use.
- Using light pressure, apply a thin, even coat with soft,
clean cloth in a circular motion.
|
