Country of Origin
United States
Shipping Weight
1.2 pounds
Manufacturer P/N
Lubri-Bond 220
Schedule B Code
2710.19.3080
Ship Dimensions
3 x 3 x 8 inches
Spec
MIL-L-23398D Amend. 2, Type II
Lubri-Bond 220 is an air drying, MoS2 based solid film lubricant with an epoxy binder system. This coating provides good corrosion resistance and performs best in higher load carrying applications. It is ideal for applications that do not require a thermally cured coating. Lubri-Bond 220 is approved/qualified to many aerospace and industrial specification.
Lubricating Solids: MoS2 Binder: Epoxy Color and Appearance: Gray/black matte finish Carrier: Solvent based Solids (by weight): 23.6 to 27.6% Density: 8.3 ± 0.5 lb/gal (995 ± 60 grams/liter) Flash Point: 45°F (7°C) Volatile Organic Compound: 737 grams/liter (6.15 lb/gal) Theoretical Coverage: 1286 ft²/gal @ 0.5 mils (7 m²/liter @ 12.7 microns) Alternative or Repair Coatings: Thermally cured and water-based equivalents for Lubri-Bond 220 are Everlube 620C or Ecoalube 642 and Everlube 9002, respectively.
Safety Data Sheet