ICOM IC-V80 Sport VHF FM Transceiver

The military tough Icom V80 Sport is water resistant and features superior protection against dust and dirt (IP54), and tested to and passed 11 categories of MIL-STD-810 environmental tests. The BTL (bridge-tied load) amplifier doubles the audio output while the 36mm speaker delivers 750mW of loud and intelligible audio, meaning The V80 Sport performs well in even the noisiest of environments. The 5.5 watts of power combined with the 19 hours of operating time (with Li-ion battery pack, 13 hours with the Ni-MH), all in an easy to hold size, will get your message through. The total 207 memory channels includes 200 regular channels, 6 scan edges and 1 call channel. Each channel name is programmable up to 5 characters for easy recognition.

The CTCSS and DTCS tone codes provide quiet stand-by and allow you to use tone-access repeaters. The pocket beep alerts you when a matching tone frequency is received. The tone scan detects the subaudible tone that is used for repeater access. The V80 Sport also features an internal VOX (Voice Operated Transmit) function for convenient hands-free operation with a compatible optional headset and plug adapter cable. Also, the VOX gain and VOX delay time are adjustable.

Comes with a AA size alkaline battery tray instead of battery and charger. Longer storage life, same power output. Perfect for your emergency kit.

General Specifications Frequency Coverage USA, Australia Europe, UK 144-148MHz (Tx), 136-174MHz* (Rx [Working Range]) 144-146MHz (Tx), 144-146MHz (Rx [Working Range]) Type of Emissions F2D/F3E (FM) No. of Memory Channels 207 (incl. 6 scan edges and 1 call) Operating Temp. Range (Radio Only) -20°C to +60°C (-4°F to +140°F) Frequency Stability ±2.5ppm (–20°C to +60°C) at 25°C Power Supply Requirement 7.2V DC Current Drain (@ 7.2V DC) Tx, High (5.5W) Rx, Max. Audio Stand-by Power Save 1.4A typical 310mA typical (Internal SP, 16 ohm load), 180mA typical (External SP, 8 ohm load) 65mA typical 20mA typical Antenna Impedance 50 ohm (BNC) Dimensions (WxHxD) 58 x 112 x 30 mm; 2-9/32 x 4-13/32 x 1-3/16 in. (projections not included) Weight (approx.) 140 g; 4.0 oz. (without battery case)

* Guaranteed range 144–148MHz

Transmitter Specifications Output Power (at 7.2V) 5.5/2.5/0.5W (High/mid/low) Max. Frequency Deviation ±5.0kHz/±2.5kHz (Wide/narrow) Spurious Emissions Less than -60dB External Microphone Connector 3-conductor 2.5(d)mm(1.10")/2.2k ohm

Receiver Specifications Sensitivity 0.14uV typical(at 12dB SINAD) Squelch Sensitivity 0.1uV typical (threshold) Selectivity 70dB/50dB typical (Wide/narrow) Intermodulation 70dB/65dB typical (Wide/narrow) Spurious & Image Rejection 75dB typical Audio Output Power @ 10% Distortion 750mW typical (Internal SP, 16 ohm load) 450mW typical (External SP, 8 ohm load) External Speaker Connector 3-conductor 3.5(d)mm(1/8")/8 ohm

Applicable U.S. Military Specifications & IP Rating

Standard MIL 810 F Method MIL 810 F Procedure Low Pressure 500.4 I, II High Temperature 501.4 I, II Low Temperature 502.4-3 I, II Temperature Shock 503.4 I Solar Radiation 505.4 I Rain 506.4 I, III Humidity 507.4 - Salt Fog 509.4 - Dust 510.4 I Vibration 514.5 I Shock 516.5 I, IV

Also meets equivalent MIL-STD-810-C, MIL-STD-810-D, and MIL-STD-810-E.

Ingress Protection Standard
Dust and Water: IP54 (Dust-protection and water resistant)