Henkel Turco EA Stripper 6930 Paint Stripper - TT-R-2918A

TURCO EA STRIPPER 6930 is an environmentally advantaged low odor, thixotropic paint remover activated by hydrogen peroxide.

It was developed for effective stripping of such resistant finishes as epoxies, epoxy primers, polyurethanes, and similar catalyzed aircraft paints.

TURCO EA STRIPPER 6930 paint remover offers a significant advance in paint stripper technology. It complies fully with the aircraft/aerospace NESHAP and meets corrosivity requirements of TT-R-2918A.

TURCO EA STRIPPER 6930 can be used on aluminum, mild steel, high strength steel, cadmium plated steel and titanium when used as directed. TURCO EA STRIPPER 6930 is not recommended for use on magnesium.

Application: Apply a uniform coating to surface being stripped by means of non-atomizing spray. Allow sufficient time for stripper to work. Performance improves as temperature increases. Agitation with a stiff bristle brush will aid in removal of the finish. Repeat if necessary.

Removal: Squeegee off bulk of loosened paint and TURCO EA STRIPPER 6930, followed by high pressure water rinse.

Disposal Information:

Dispose of spent remover and paint residue per local, state and regional regulations. Refer to HENKEL SURFACE TECHNOLOGIES MATERIAL SAFETY DATA SHEET for additional disposal information.

CAUTION!

TURCO EA STRIPPER 6930 contains hydrogen peroxide. Avoid contact with eyes, skin and clothing. Do not take internally. Do not spray in confined areas. Avoid prolonged breathing of vapors. Use with adequate (equivalent to outdoor) ventilation.

Protective clothing, such as a chemical face shield or goggles and gloves, should be worn and a NIOSH-approved respirator equipped with a mechanical filter should be worn for mist conditions.

Store containers at a temperature between 2șC and 40șC.

Before using this product refer to container label and HENKEL SURFACE TECHNOLOGIES MATERIAL SAFETY DATA SHEET for additional precautionary, handling and first aid information.