Henkel Turco 6813-E Paint Stripper - MIL-R-25134

TURCO 6813-E is a pink, viscous, thixotropic, alkaline liquid with improved stripping power.

It is formulated to remove multiple coats of aircraft paints, such as polyurethanes, epoxies, epoxy primers, including such resistant primers as Koroflex, from all aircraft alloys, including aluminum, mild steel, titanium, high strength steel, magnesium and many composites.

Applied by spray, flow-on or brush techniques. Clings to vertical as well as overhead surfaces.

No chlorinated solvents.

Application:Apply by brush, non-atomizing spray or flow-on (no spray tip) methods to surface requiring stripping. Apply a smooth, even coat and allow sufficient dwell time for remover to penetrate and loosen paint. A mist coat, followed by a light, full, even coat is preferred. When paint is loosened, thoroughly agitate the surface with a stiff bristle brush. If paint adheres to specific areas, just allow additional dwell time before removing from surface. TURCO 6813-E remains active for several hours so additional applications are often not required.

Removal:Spent TURCO 6813-E and paint residues may be squeegeed off or rinsed with high pressure, high volume cold water. Squeegeeing, followed with a wash with an alkaline cleaner is preferred. If reapplication is required, the stripped paint and spent remover should be squeegeed off and, without an intervening alkaline wash or water rinse, the second coat applied immediately before the surface can dry.

NOTE:TURCO 6813-E may attack plastics, rubber seals and tires. These materials should be protected.

Disposal Information:Dispose of spent solution per local, state and regional regulations. Refer to your TURCO MATERIAL SAFETY DATA SHEET for additional disposal information.

CAUTION!May cause irritation to skin and eyes. May be harmful if swallowed.

TURCO 6813-E paint remover contains ammonium hydroxide. Do not spray in closed or confined areas. Use with adequate (equivalent to outdoor) ventilation. Avoid breathing of vapor for prolonged periods of time. Avoid contact with eyes, skin and clothing. Do not take internally.

Protective clothing, such as a chemical face shield or goggles and gloves, apron and boots, made from solvent resistant materials should be worn when handling this product.

Store in closed containers away from excessive heat or direct sunlight.

Before using this product refer to container label and TURCO MATERIAL SAFETY DATA SHEET for additional precautionary, handling and first aid information.