LOCTITEŽ C5-AŽ Copper Grade Anti-Seize Stick provides a shield against high temperature seizing and galling. All mated parts, studs, bolts, flanges and gaskets, remove more easily and in cleaner and better condition. This product can be used on copper, brass, cast iron, steel, all alloys including stainless steel, all plastics and all non-metallic gasketing materials. Typical applications include original equipment and maintenance, and equipment associated with petroleum chemicals, steel mills, power plants, marine and foundries. This product is typically used in applications up to 982°C.
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a lubricant for chlorine or other strong oxidizing materials. For safe handling information on this product, consult the Material Safety Data Sheet (MSDS).
LMS dated November-13, 2002. Test reports for each batch are available for the indicated properties. LMS test reports include selected QC test parameters considered appropriate to specifications for customer use. Additionally, comprehensive controls are in place to assure product quality and consistency. Special customer specification requirements may be coordinated through Henkel Quality.
An anti-seize lubricant used on a bolt helps to develop greater clamp load for the same torque compared to an unlubricated bolt. An additional benefit is greater uniformity in clamp load among a series of bolts. The relationship between torque and clamp load is expressed in the following equation: T = K x F x D, where T = Torque (Nˇm, lb.in, lb.ft); K = Torque coefficient or nut factor, determine experimentally; F = Clamp load (N, lb.); D = Nominal diameter of bolt (mm, in.).
Torque coefficient, k:
SAE grade 5, class2, phosphate coated steel nuts & bolts - 0.16
SAE grade 5, class2, phosphate coated steel nuts & bolts, solvent cleaned, not lubricated - 0.19
