Pliers: Cutting Pliers, Needlenose Pliers, Cannon Plug Pliers

6" Long Nose Cutter: Pliers carry a lifetime warranty
6" Slim Needlenose Pliers: These are the pliers every electronic technician is guaranteed to have in his or her toolbox. The needlenose is the most versitile pliers for electonic working... period!
5.5" Needlenose Pliers: These are the pliers every electronic technician is guaranteed to have in his or her toolbox. The needlenose is the most versitile pliers for electonic working... period!
5.5" Bent Nose Pliers: Bent nose pliers are slimilar to needlenose pliers, but their noses are bent at a 45 degree angle to facilitate picking up small parts or wires.
5.5" Flat Nose (Duckbill) Pliers: Flat nose pliers (also called duckbills) are used in electronics the same way seamers are used in sheet metal work. They are great for straightening out bent wires, folding the ends of leads, or for flattening out bent terminals or pins.
7" Duck Bill Pliers: Serrated jaws. Lifetime warranty
5.5" Round Nose Pliers: Round nose pliers are made for one purpose only, and they do it extremely well: use them to form bends and loops in wires for bare wire terminal connection, or for bending component leads prior to circuit installation.
6" Diagonal Cutter: Pliers carry a lifetime warranty.
Hand Notcher: Notches a neat and uniform 31 degree "V" every time. The throat depth is 3/4".
Xcelite® Wire Nippers (With FOD Clip):Top quality Xcelite brand wire nippers have induction hardened jaws to cut up to cut even the hardest wires (including paino wire) all the way up to 8 AWG copper wires.
Imperial® BS103 Battery Cable Cutter: A powerful set of cutters specifically designed to cut through copper battery cables. Easily cuts through cables as thick as 2/0 gauge.
8" Lineman's Pliers: These heavy-duty pliers (also known as Kliens) are the workhorse tool of electricians who use them as wire cutters, pliers, crimpers, strippers, and even as a hammer (no kidding!).
4.5" Diagonal Cutters: Diagonal cutters (also called dykes( are the most versitile pair of cutters in the electronic technician's toolbox. They are used to cut wires and component leads to size before crimping or soldering.
Extra Slim 4.5" Flush Diagonal Cutters: Diagonal cutters (also called dykes( are the most versitile pair of cutters in the electronic technician's toolbox. They are used to cut wires and component leads to size before crimping or soldering. Extra slim design gets into confined areas.
4.5" Full Flush Side Cutters: Flush side cutters (also called flush cutters, or side nippers) are used to cut wire ends flush to the surface. Use them to cut the ends of wires flush to the terminals after soldering or crimping.
5" Oblique End Nippers: Oblique End Nippers are for cutting wires in tight areas, or for flush-cutting component ends in electrical cirtuits. The narrow angled jaws allow you to navigate through wire harnesses or closely packed components and cut the correct wires.
ESD Safe Wire Nippers with FOD Clip: These wire nippers have hardened jaws to cut up to 12 AWG copper wires without dulling. Plus it has a FOD catching clip that will hold the shipped ends of wires before they can fly off and become a safety hazard.
Crescent® 52910N Cannon Plug Pliers: Designed to safely install and remove Cannon plug collars. Made of non-sparking steel alloy for total safety. Also incorporates removable plastic inserts which will grip on smooth, oily or serrated surfaces.
AT508K Cannon Plug Pilers designed to make the installation and removal of electric connectors easier and safe when if is necessary to loosen or tighten a threaded collar.
Snap Ring Kit: Very high quality heavy-duty snap ring pliers works to remove both internal and external snap rings with ease. Complete kit includes pliers and the following tip sizes: .035", .045", and .060".
6" Vise-Grip Longnose Pliers
7" Vise-Grip Pliers with 1" grip
9" Vise-Grip Longnose Pliers
Revolving Punch Pliers: A convenient spring tension, self opening tool for punching round holes in leather, plastic, rubber, canvas and similar materials.
Combination Hole Punch & Eylet Pliers: A convenient spring-tension, self-operated tool for setting eyelets in thin material such as leather, plastic, rubber, canvas or cardboard.
Replacement eyelets for (G70) Eyelet Pliers: Pack of 75 pieces 7/32" (5.5mm) diameter. Brass-plated steel.
9" Safety Wire Pliers (Import)
10" Safety Wire Pliers (Import)
6" Auto Return Safety Wire Pliers (Import)
Milbar 25W Safety Wire Pliers: 6" Reversible Wire Twister, Diagonal Nose
Milbar 11WS Safety Wire Pliers: 6" Automatic Return Wire Twisters, Diagonal Nose, RH Twist
Milbar 1W393 Safety Wire Pliers: 9" Automatic Return Wire Twisters, Diagonal Nose, RH Twist
Milbar 5W4 Safety Wire Pliers: 9" SafetyTwist® Auto Return Wire Twister, Diagonal Nose, LH Twist
Milbar 26W Safety Wire Pliers: 9" Reversible Wire Twister, Diagonal Nose

Check the Status of your Order:
Order Number:
Zip Code:	Loading