You are here: HomeShop by BrandAircraft Tool Supply CompanyHand Squeezer Accessories

Hand Squeezer Accessories

When you’re in a squeeze and need a hard to find aircraft tool pronto, come to www.SkyGeek.com. You may find yourself in a bind where you need hand squeezer accessories to get your job done.

Included in this section of hand squeezer accessories are steel flush squeezer sets, squeezer yokes to fit your rivet squeezer series, and other squeezer parts that you will probably need to go with your riveting squeezers.

Questions? Contact the Sky Geeks Pilot Shop Customer Service Via Email or Phone

If you have any additional questions, we encourage you to contact our knowledgeable and friendly customer service experts via SkyGeek Customer Care Options.

Flush 3/8" X 1/8" Squeezer Set: Flush squeezer set. Made of steel and polished to a mirror-like finish. .187" (3/16") shank. 3/8" diameter by 1/8" long.
Flush 3/8" X 1/4" Squeezer Set: Flush squeezer set. Made of steel and polished to a mirror-like finish. .187" (3/16") shank. 3/8" diameter by 1/4" long.
Flush 3/8" X 3/8" Squeezer Set: Flush squeezer set. Made of steel and polished to a mirror-like finish. .187" (3/16") shank. 3/8" diameter by 3/8" long.
Flush 3/8" X 1/2" Squeezer Set: Flush squeezer set. Made of steel and polished to a mirror-like finish. .187" (3/16") shank. 3/8" diameter by 1/2" long.
ATSRS Super Duty 1-1/2" Squeezer Yoke: Replacement 1-1/2" stainless steel yoke for ATSRS Super Duty Rivet Squeezers.
ATSRS Series 1" Squeezer Yoke: 1" Yoke for ATSRS series Rivet Squeezers.
ATSRS Series 2" Squeezer Yoke
ATSRS 3" Super Duty Squeezer Yoke: Replacement 3" stainless steel yoke for ATSRS Super Duty Rivet Squeezers.
ATSRS Series 3" Squeezer Yoke: 3" Yoke for ATSRS series Rivet Squeezers
Rivet Squeezer Upgrade Kit: Upgrade kit converts 5011-1 and 5022-3 Rivet Squeezers to new bench model. Easy to install. Does not work with older model rivet squeezers.
Longeron Yoke (5011 & 5022 Series Squeezers): Designed to reach around angle brackets and channels typically found in longerons and sitffners. Precision machined from solid billet of tool steel and hardened to resist wear. For use with the ATS-Pro 5011 AND 5022 series Rivet Squeezers.
4" Deep Reach Yoke (5011 & 5022 Series Squeezers): Long 4" reach x 1-1/4" Gap Height to get into difficult areas. Recommend that you use this yoke with our Bench Mounting Bracket (p/n RS-BK) for extra stability. Precision machined from solid billet of tool steel and hardened to resist wear. For use with the ATS-Pro 5011 AND 5022 series Rivet Squeezers. Lifetime ATS-Pro warranty.
1-1/2" Close Quarters Yoke (5011 & 5022 Series Squeezers): Head clearance is only 1/4" to get into very tight areas. 1-1/2" Reach x 1-1/4" Gap Height. Will not flex even when driving 3/16" rivets. Precision machined from solid billet of tool steel and hardened to resist wear. For use with the ATS-Pro 5011 AND 5022 series Rivet Squeezers.
3" Close Quarters Yoke (5011 & 5022 Series Squeezers): Head clearance is only 1/4" to get into very tight areas. 3" Reach x 1/4" Gap Height. Will not flex even when driving 3/16" rivets. Precision machined from solid billet of tool steel and hardened to resist wear. For use with the ATS-Pro 5011 AND 5022 series Rivet Squeezers.
3" Hand Squeezer Yoke: 3" squeezer head. For use with 5011-1 & 5022-3 rivet squeezers.
1-1/2" Hand Squeezer Yoke: 3" squeezer head. For use with 5011-1 & 5022-3 rivet squeezers.