Hammonds Biobor JF Diesel and Jet Fuel Microbicide - MIL-S-53021A

This liquid fuel additive is specially designed to combat fungus and other microbial life in hydrocarbon fuels such as diesel and jet fuels, in addition to light oils and transmission fluid. BioborJF eliminates the growth of harmful slime-producing fungi by slowing the microbe's metabolism, effectively making it impossible for the microbe to sustain life. By eliminating the microbes, you can prevent slime from clogging filters and pipelines, attacking rubber fuel system components and corroding metal surfaces. What makes it so effective is its equilibrium solubility in both fuel and water under conditions of fuel storage. This means that once treated, the entire fuel supply is protected. BioborJF is simple to use and harmless to the wide variety of fuel system parts, top coatings, sealants and elastomeric materials tested.

GENERAL USAGE
If a system is badly contaminated, drain water bottoms. Water bottoms in storage tanks should be kept to a minimum. Good housekeeping is important in treating slime problems, but it is not a cure. Biobor JF is used at 270 ppm in fuel to effect sterilization, and subsequently at 135 ppm to maintain fungus-free fuel. Ideally, Biobor JF should be metered. However, in the absence of metering equipment, Biobor JF may be manually batch-blended. If batch-blended, as in tank trucks or small aircraft wing tanks, Biobor JF should be introduced while the tank is being filled and after the tank is approximately 1/2 full. This will ensure faster and more complete dispersion.

All Biobor JF containers must be kept closed from the atmosphere. Protect Biobor JF from any water contamination. Biobor JF is classified as a flammable and is shipped as a FLAMMABLE LIQUID N.O.S. (NAPHTHA) UN 1993, Class 3.3, PG III

Fuel to be Treated	Biobor JF (in oz.) Maintenance Dosage	Shock Treatment
40	1/2	1
50	3/4	1-1/2
60	7/8	1-3/4
100	1-1/4	2-3/4
300	4	8
500	7	13.5
2500	32	64
10,000	1 gal.	2 gal.
50,000	5 gal.	10 gal.