Concorde RG-12LSA General Aviation AGM Aircraft Battery - 12V - Main VRLA

A Real Aircraft Battery for LSA’s!

Concorde presents an all new recombinant gas RG Series Light Sport Aircraft Battery built under our strict ISO 9001 + AS9100 quality standards using the manufacturing processes you have come to expect with all Concorde Batteries. As a result of Concorde’s experience, our design features for superior performance and high reliability are set apart from other lead acid battery manufacturers. Concorde batteries are constructed with larger than typical over the partition intercell connections for optimum current flow. Overall, our batteries are designed with low internal resistance for high output current and excellent charge acceptance.

Our General Aviation batteries are designed with terminals and hardware of silicon bronze alloy providing a corrosion free, low impedance connection. Lead and steel terminals with copper cables will corrode. The old flooded electrolyte vented batteries cause corrosion into the battery terminals, box, tray, and airframe.

RG-12LSA is housed in a robust reinforced polypropylene container and cover with bronze alloy terminals. Ships Hazmat exempt via land, sea and air.

• Recombinant Gas - The RG® Series are low resistance, valve regulated lead acid (VRLA) batteries. Maintenance free
• Constructed with non removable vent valves - no addition of electrolyte or water required
• Aerobatic: Non spillable at any altitude or attitude
• Factory tested to assure airworthiness
• Shipped fully charged and ready to install
• Manufactured with absorbed glass mat separators (AGM)
• RG® Series batteries ship HAZMAT EXEMPT

NOTE: This aircraft battery is not designed or intended for turbine aircraft engine starting applications. Warranty coverage applies to reciprocating aircraft engine starting, and standby / essential power installations.

Additional Documents:

• RG-12LSA Diagram
• Concorde FAA Eligibility List

The Concorde RG-12LSA Battery does not have Supplemental Type Certification or FAA Parts Manufacturing Approval.