Bogert Aviation 10M-OFT Oil Filter Tool

The Oil Filter Tool was created to assist in removing a stuck filter, without resorting to the traditional hammer, punch, chisel, and or the huge pump pliers methods. Uncle Norm's wanted the tool to be safe in tight quarters and unable to slip, attempting to minimize damage to nearby components. This is still a messy process but this tool will always work to remove stuck filters without damaging anything else.

Instructions

1. Open the filter can and remove the filter element. If necessary, cut or tear open the filter can where ever it is accessible, gaining access to the filter element.
2. Use the new filter as a guide. Set the pin position on the Oil Filter Tool to fit into the oil holes in the oil filter plate.
3. Insert the Oil Filter Tool into the stuck filter can with a socket wrench and engage the oil holes in the filter plate with the pins of the Oil Filter Tool.
4. Turn counter clockwise to loosen the filter.

• Easily remove a stuck filter
• Works in tight spaces
• Won't damage anything
• Works on Boats, Recreational Vehicles, Aircraft & Automotive
• Made in USA