

Brackett BA-2710 Filter AssemblyBuy as a Whole Package & Save Item #: BA2710 Our Price: $82.99 Or...Buy the pieces you need seperately! ![]() Same Day Ship Guarantee Add $2.99 ![]() Add a Certification Add $10.00 ![]() |
This Brackett polyurethane air filter element has been designed to provide maximum dust collecting efficiency, non-restrictive air flow, and economical element replacement, while maintaining a lightweight filter. The element has been treated with a distinctive treatment called a wetted agent and is approximately 98% efficient. The wetted agent is an accompaniment in the efficient capturing of dust. In addition, the element has received a fire retardant treatment. For the above reasons, replace the element each 200 hours of use/12 months or when 50% covered with foreign material. DO NOT WASH AND REUSE. NOTE: The expected shelf life of Brackett elements stored in their original packaging and out of direct sunlight is as follows: 4 years from date of manufacture listed on the front of the element packaging (EX: MFG MONTH/YEAR). This allows the element to be installed on an aircraft at the end of its shelf life.
Overall Rating for Brackett BA-2710 Filter Assembly
Step 1: Installing upper guide angles. These angles are to be installed so the filter is retained in between and can be slid in and out for servicing. The five pilot holes must be drilled with a #30 drill. NOTE: An easy method to keep the angles aligned while installing is to leave the original filter in the air box and place the angles in position on top of the filter for drilling. Step 2: Remove element PN BA-2705 from bag. Squeeze out excess wettant and install element between the frame. Make sure the element notches fit the frame tabs. Step 3: Install filter into the cowl using the same procedure as with the original filter. Step 4: Apply service decal to or near the filter door. PLACE SO IT IS READABLE. Servicing: Under normal conditions, replace filter element PN BA-2705 after 100 hours of use or 1 year intervals. Under severely dusty conditions, check daily and replace when element is 50% covered with foreign material. For Continued Airworthiness Instructions, see Form I-194.
Your question might already be answered below, wouldn't that be a time saver! If your question has not been answered below please click the "Ask a Question" button below, fill out the form, and one of our Geeks will answer it as quickly as possible. Note: Our Geeks are available Monday-Friday 9AM to 5PM (EST) normal business days, to respond to your questions. | |||||||||||
Features | |||||||||||
Specifications | |||||||||||
In The Box | |||||||||||
Related Products
|