Aerospace Sealants AS3145 is an FAA-approved replacement for Dow Corning RTV3145 high strength, neutral cure RTV silicone adhesive sealant. In addition to being extremely strong, AS3145 is a non-corrosive rubber that can be used where fast adhesion and fast development of physical properties is required.
Can be used in manual and automatic dispensing equipment
When applied to substrate, allows handling of bonded assembly within 1 hour
Clear adhesive sealant
Available in a 3 fluid ounce tube
Overall Rating for Aerospace Sealants AS3145 FAA-PMA Clear Silicone Adhesive Sealant - 3 oz Tube
Disclaimer: While reasonable efforts have been made to ensure all information on this website is accurate, SkyGeek.com and Styles Logistics, Inc. do not assume responsibility for any errors or omissions. All specifications, illustrations, data and prices are subject to change without notice.
Fast room temperature cure
Excellent unprimed adhesion to plastic, metal and glass
Fast onset of adhesion
Viscosity, cps: 500,000
Specific Gravity: 1.12
Consistency: Thixotropic paste
Working Time, mins. @ R.T.: 8
Tack Free Time, mins. @ R.T.: 15
Application Rate, 90 PSI, g/min.: 300
CURED - ROOM TEMPERATURE
Cured - 72 hrs. @ R.T.
Tensile Strength, PSI: 900
Elongation, %: 800
Durometer, Shore A: 50
Peel Strength, PPI: 100
Tear Strength, PLI: 200
Dielectric Strength, V/mil: 790
Dielectric Constant: 2.6
Dissipation Factor: 0.0009
Volume Resistivity, ohm·cm: 1.8 x 1015
Brittle Point, °F (°C): -68 (-55)
Maximum Continuous Operating Temperature, °F (°C): 500 (260)
Maximum Continuous Intermittent Temperature, °F (°C): 600 (315)
If the item that you are trying to ship is deemed Hazmat you may have an additional fee added to your order when you check out. Items are deemed Hazmat as per the Section 14 Transport Information located in the item's Material Safety Data Sheet (MSDS). Sorry, but things that can go "boom" are hard to ship and we have to pass on our fees.
Flammable or explosive items such as Fire Extinguishers, MEK, Toluene, Paint Thinner, etc. are subject to a $25.00 Hazmat fee via ground shipping methods. However, the majority of Hazmat items have no fee when shipping with a ground method.
Most Hazardous Goods are subject to air and international transport fees. This fee is $40 for domestic air shipping methods and $80 for international shipping methods.
Mail the completed form with the original UPC code from the product package and a copy of your sales receipt with the eligible product circled postmarked no later than 1/1/2012. Service activation is required; mail in one of the following options as proof of service activation:
Copy of your activation confirmation email (provided after you activate service).
Copy of the sale receipt for a SPOT service certificate (available at www.findmeSPOT.com).
Promotion #37761, SPOT 2 NATIONAL REBATE PO Box 22092, Tempe, AZ 85285-2092.