AeroShell Sport Plus 2 oil is designed specifically for the intense operating conditions of light sport 2-stroke engines. It reduces the formation of deposits and protects the 2-stroke engine's inherent exposure to corrosion and potential ring sticking. This oil can be used with both leaded and unleaded fuels in all climates.
AeroShell Oil Sport Plus 2 is intended for use in 2-stroke aircraft piston engines, which have previously relied on general purpose 2-stroke oils originally developed for ground/marine based applications. Suitable for all air-cooled and water cooled engine types. Can be used in premix and separate oil injection systems. Can be used with unleaded and leaded (AVGAS 100LL) fuels.
First specific oil for Light Sport and Very Light/Ultra Light 2 – stroke aircraft enginesHigh Film & Shear strength formulation specifically designed for strenuous operating conditions experienced by these types of aviation enginesPromotes engine cleanliness – protects engine parts such as pistons, rings and exhaust ports from excessive (or harmful) deposits - cokingOutstanding performance in regard to ring ‘sticking’Excellent ‘clean burn’ performanceHelps to protect engine parts from corrosion during engine shutdown and storageHelps engine achieve TBO (Time Before Overhaul)Suitable for use in oil injection and pre-mixed oil/fuel systemsProtects highly stressed engine parts against scuffing and wearCan be used in any climateSuperior performance compared to synthetic 2-stroke products when used in the aviation applicationAdvanced anti-rust and anti-wear packageDyed green for better recognitionCan be mixed with other mineral & synthetic 2-stroke oils previously usedDo not use AeroShell Oil Sport Plus 2 in engines that are designed to use Ashless Dispersant aviation piston engine oils such as AeroShell W oils. This includes aircooled Teledyne Continental Motors, Textron Lycoming, Jabiru and ROTAX ® 4-stroke engines.
Typical Physical Characteristics
Gravity, °API - ASTm D-287 - 29.3
Density, g/cc - ASTM D-1298 - 0.88
Pounds per Gallon - ASTM D-1298 - 73.4
Viscosity
@ 40°C, cSt - ASTM D-445 - 78.6
@ 100°C, cSt - ASTM D-445 - 10.3
Viscosity Index - ASTM D-2270 - 112
Pour Point, °C (°F) - ASTM D-97 - -33 (-27)
Flash Point, °C (°F) - ASTM D-92 - 104 (219)