Tempest AA48108-2 Airplane Oil Filters

The improved nut welds on this Tempest product means easy fitting and zero frustration; installation nuts will never fall off of your Tempest AA48108! Its non-stick gaskets make oil filter inspection and maintenance a breeze. Enjoy the Tempest airplane oil filter to improve your aircraft?s oil quality during every flight, reducing harmful debris build-up in your engine. Tempest oil filters are affordable and easy-to-install, with incredible benefits that are second-to-none.

The new "Dash II" is 5/16" shorter than competitive filters, making it the shortest oil filter on the market.

1. Lubricate gasket with Dow Corning 4 compound or equivalent. If unavailable, use clean engine oil.
2. Torque filter to 16-18 ft-lb.
3. Run engine and check for oil leaks.
4. Check oil level.
5. Safety wire.

Improved Nut Welds – Nut welds are so strong that the can will distort without breaking the welds! During production testing nuts are actually ripped away from the can – the base metal must fail, the welds must not (see photo). Using Tempest Original filters means no more frustration with installation nuts falling off.

Meets TCM bypass Specification of 12-14psi, reducing risk of premature bypass that can result in unfiltered oil flowing to your engine.

Burst strength of 600 psi – Significant improvements to the roll seam process used on the bottom of the can substantially improved the design burst strength of the Tempest Original oil filter to over 600 pounds per square inch, exceeding the ARP 1400 standard by 50 percent. Extra strength gives added assurance that Tempest oil filters are made to withstand the harshest operating conditions.

Non-Stick Gaskets – Tempest Original oil filters incorporate especially lubricated synthetic rubber base gaskets made from a proprietary compound. This helps insure proper torque during installation and easy removal.