3M Overspray Protective Sheeting
3M Overspray Protective Sheeting 3M? Overspray Protective Sheeting is a paintable, high-density, tear-resistant, translucent polyethylene film designed for critical edge masking as well as protection from paint overspray. Available in three sizes to protect all size cars, vans, sports utility vehicles and trucks. Will withstand bake cycles up to 225 degree F for up to 30 minutes.
Use InstructionsIMPORTANTAll surfaces of the vehicle must be completely dry before covering. Moisture trapped under the film may cause ghosting or imprinting in the paint of the vehicleProtective sheeting must be oriented with the paintable side up. The printing on the center of the sheeting will be readable when the film is properly orientedPlastics should not be used to cover fresh paint systems )paints less than 30 days old would be considered fresh). If it's necessary to protect fresh paint, sheeting must be removed as soon as possible, and definitely before car is bakedMelting temperature of sheeting is 250 degrees F (122 degrees C)
FeaturesSpecially formulated high density polyethylene film (HDPE)Sheeting clings to vehicle and has center printing for easy alignmentThree widths available and product is cut-to-length
AdvantagesExcellent paint adherence and paint overspray adhesionEasy to handle for one-person applicationsSizes available to fit all size vehicles
BenefitsResists paint flaking which eliminates the need for masking paper at the critical paint edgeHelps save time and moneyHelps save waste and eliminates the need for masking paper to skirt the lower part of the vehicle